Support Notes : Configuration for a Cisco 820 Series ADSL Router

version 12.2
no parser cache
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname wibbleplink
!
logging rate-limit console 10 except errors
enable secret 5 <secret>
enable password 7 <password>
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
no ip source-route
ip name-server 81.91.102.36
ip name-server 81.91.102.37
!
!
!
!
interface Ethernet0
 ip address <your first routed ip> <your netmask>
 ip nat inside
 hold-queue 100 out
!
interface ATM0
 no ip address
 no atm ilmi-keepalive
 pvc 0/38
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
 !
 bundle-enable
 dsl operating-mode auto
 hold-queue 224 in
!
interface Dialer1
 mtu 1465
 ip address negotiated
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ppp authentication chap callin
 ppp chap hostname <username>@adsl.anlx.net
 ppp chap password 7 <adsl password>
 ppp ipcp dns request
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
!
dialer-list 1 protocol ip permit
!
line con 0
 exec-timeout 120 0
 stopbits 1
line vty 0 4
 exec-timeout 120 0
 password 7 14041C535E062B
 login
!
scheduler max-task-time 5000
sntp server 81.91.100.29
end

Comments

To add a comment to this support note, click here.

	Copyright © 2001-2018 Associated Networks (UK) Ltd. All Rights Reserved.